

molex - Outdoor Unitube Single Sheathed Armoured 50/125μm OM2 Type
Cable containing upto 4 - 12 optical fibres in water blocked loose tube, taped, corrugated steel tape armoured (STA) polyethylene (HDPE) outer sheathed embedded with two steel wires on the periphery.

molex - Outdoor Unitube Single Sheathed Armored 50/125μm OM3 Type
Cable containing up to 4 - 12 optical fibers in water blocked loose tube. Taped, corrugated steel tape armored (STA); polyethylene (HDPE) outer sheathed; and embedded with two steel wires on the periphery. The cables are constructed with a UV stabilized PE jacket. The cable is antitermite and anti-rodent.

molex - Outdoor Unitube Single Sheathed Armoured 9/125μm OS1/OS2 Type
Cable containing upto 4 - 12 optical fibres in water blocked loose tube, taped, corrugated steel tape armoured (STA) polyethylene (HDPE) outer sheathed embedded with two steel wires on the periphery. The cables are with UV Stabilized PE Jacket and protected from Rodent attacks.

molex - Optical Fibre Adapter Plates
Molex’s Optical Fibre Adapter Plates are modular platform that is compatible with a various Molex Enclosures and Fibre Splicing Systems. Adapter density ranges from 6 fibres to 24 fibre per plate, allowing for 1U 96 fibre density. Available in a variety of connectors and performance levels, the Molex Plates require no tools for installation

molex - PowerCat 5e Cable
Molex PowerCat 5e 4 Pair UTP cable, has been designed to support high speed data transmission systems such as Gigabit Ethernet. This cable is part of the PowerCat 5e System range of products, that have been designed based on the PowerSum principle of crosstalk measurement and testing.

molex - PowerCat 6 4 Pair Bulk Cable UTP
Molex PowerCat 6 (C6) 4 Pair U/UTP cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification.

molex - PowerCat 6 F/UTP Cable LS0H 332.1
Molex PowerCat 6 FTP 4 Pair cable has been designed to support high speed data transmission systems. The cable is part of the PowerCat 6 FTP range of products that are designed to support a growing requirement for shielded cabling systems.

molex - PowerCat 6A U/FTP Cable
The PowerCat 6A Shielded Cable is a key component of the PowerCat 6A end-to-end solution. Molex PowerCat 6A U/FTP Cable is specifically designed to support high speed data network applications such as 10-Gigabit Ethernet (10GBASE-T). The cable is constructed of 4 screened pairs and a drain wire. This cable minimises alien crosstalk, provides excellent signal isolation and provides superior electromagnetic interference (EMI) protection

molex - S/FTP cat. 7A 1.2GHz Cable, 4 Pairs, 500m Reel
C7A S/FTP Cable (each pair has individual shield plus common shield for the cable made of tinned copper braid) is a complementary product for shielded PowerCat 6 and PowerCat 6A (with limitations). The product meets requirements of C7A in a 1-1000MHz range as per IEC 61156-5 (specified in ISO/IEC 11801 2nd edition).

molex - Fusion Splice Holder 24 Fibre
Molex’s 24 Fibre Splice holder is suitable for use inside both Sliding and Fixed Patch Panels. Its capacity is for up to 24 Fusion Splice Protectors in 45mm or 61mm lengths. The splice holder consists of a base with self adhesive pads for securing on a flat surface and a lid complete with self adhesive label on which to record the ID’s of each fibre core.

molex - PowerCat 6 DataGate Jack
The DataGate jack is designed to maintain clean secure connections. The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback - the spring-loaded shutter pops out an improperly seated patch cord–all with single-handed plug-in and removal. DataGate jacks utilize patented IDC V-shaped contacts that flex not fatigue when terminated.

molex - PowerCat 5e DataGate Jack
The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback - the spring-loaded shutter pops out an improperly seated patch cord–all with single-handed plug-in and removal.

molex - PowerCat 6A DataGate Shielded Jack
The PowerCat 6A DataGate jack offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die cast zinc alloy jack body housing. This shielded jack also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded jack is dual colour coded for either 568A or 568B wiring schedules.

molex - PowerCat 5E U/UTP Patch Cord
Molex PowerCat 5E U/UTP Patch Cords are key components of PowerCat 5E U/UTP End-to-End Solution and are designed to support data networks for 10/100BASE-T and 1000BASE-T applications.

molex - PowerCat 5e DataGate Jack
The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback - the spring-loaded shutter pops out an improperly seated patch cord–all with single-handed plug-in and removal.

molex - PowerCat 6A DataGate Shielded Jack
The PowerCat 6A DataGate jack offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die cast zinc alloy jack body housing. This shielded jack also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded jack is dual colour coded for either 568A or 568B wiring schedules.

molex - PowerCat 5E U/UTP Patch Cord
Molex PowerCat 5E U/UTP Patch Cords are key components of PowerCat 5E U/UTP End-to-End Solution and are designed to support data networks for 10/100BASE-T and 1000BASE-T applications.

molex - PowerCat 6A Shielded Patch Cord
Molex PowerCat 6A Shielded Patch Cords are key components of the PowerCat 6A shielded end-to-end solution. Molex PowerCat 6A Patch Cords are designed to support high speed 10GBASE-T networks and are backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colours and lengths, PowerCat 6A patch cords are preterminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

molex - 24 Port DataGate Multimedia Panel - unloaded
The Molex 24 Port DataGate Multimedia panel is a 1U unloaded panel that can be loaded with data, fibre or coax modules for applications where a variety of media applications are required. This field installable patch panel can be loaded with 1 to 24 DataGate modules allowing for easy maintenance if jacks have to be removed or replaced. Suitable for small installations with the feature of expanding for future upgrades

molex - PowerCat 6 Patch Panels
PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented springloaded shutter and can be colour coded to match jack outlets. Offering both front and rear labelling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

molex - 50 Port KATT IDC Voice Patch Panel
The Molex 50 port Voice Patch Panel is dedicated to the termination of vertical cabling, supporting UTP, 4, 25 or 50 pair cables in a voice backbone.

molex - PowerCat 6™ Angled Patch Panel
PowerCat 6 Angled Patch Panels are ideal for installations of high density or which utilise extensive side and end-of-the-rack cable management.

molex - PowerCat 6A Shielded Patch Panel
The Molex PowerCat 6A Shielded Patch Panel is a key component of the PowerCat 6A shielded end-to-end solution.

molex - PowerCat™ 6A Shielded Patch Panel
The PowerCat 6A Shielded Angled Patch Panel is a key component of the PowerCat 6A shielded end-to-end solution.

molex - PowerCat Unloaded DataGate Patch Panels
The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability

molex - Fiber Drawer 24 Port Configurable
The Molex 24 Port Configurable Fiber drawer is a 1U rack mount unit for storing and terminating incoming fiber cable. Using our vast range of 6 Pak Plates you can configure your fiber system to suit all fiber applications

molex - WR12, WR24, WR48 Fibre Enclosures
The WR12/24/48 is a versatile fibre management enclosure that can be used as a wall mount enclosure for isolated applications or rack mount enclosure for integrated applications.

molex - Synergy Wallplates 86 x 86mm (Unloaded)
The stylish unloaded Synergy Wallplates were designed specifically to accept the UTP Datagate Connector.

molex - Optical Fibre Patch Cords
Molex’s Optical Fibre Patch Cords are LS0H jacketed as standard. PVC and Plenum rated cables are available at request. Molex patch cords offer factory–controlled performance in a variety of connector, ISO performance standards and lengths. Molex has taken specific attention to the end-face geometry and fibre core alignment to ensure reliability and optimised performance.